PAGE 00 > 01 > 02 > 03 > 04 > 05 > 06 > 07

CONTACTORS BF series – 07 Replacement of BFX91 and BFX92 coils

Video transcript

You can replace the BFX91 and BFX92 coils of BF Series contactors without a screwdriver! Unlatch the front part using the levers provided. You can pull out the coil to replace by pulling it upwards. Orient the new coil so that the marks are towards the top of the contactor. Then latch it to the contactor by pushing it down. Lastly, centre the contactor’s spring in its seat above the coil and close the contactor. Check the contactor by pressing here to ensure it is properly assembled. Done. Enjoy using it!

Check out all technical information on contactors range.

Check out the “Add-on blocks and accessories for BF series contactors” page. 

Download the calaogue chapter on contactors.

previous